dip and d subminiature jumpers note: aries specializes in custom design and production. in addition to the standard products shown on this page, special materials, platings, sizes, and configurations can be furnished, depending on quantities. aries reserves the right to change product specifications without notice. ordering informa tion cable det ail header det ail xxx-xxx-xxx no. of contacts (d connector) length l in inches: d to dip=2.000 [50.80] min. d to d=3.000 [76.20] min. no. of termination contacts termination style (a, b, c, d, e, or m, f for male or female d connector) m=male d connector f=female d connector a=(no. of pins per row x .100 [2.54]) + .095 [2.41] b=(no. of pins per row - 1) x .100 [2.54] w=(no. of conductors x .050 [1.27]) + .005 [.08] y=(no. of conductors - 1) x .050 [1.27] see data sheet 11017 for other configurations and additional information. numbers shown pin side for reference only. style a style b features: ? aries offers a wide array of dip/d subminiature jumper configura- tions and wiring possibilities for all your programming needs. ? reliable, electronically tested solder connections. ? cable is potted to provide strain relief. ? protective covers are also provided on headers. ? 10-color cable allows for easy identification and tracing. ? 9 pin d connector available with 8 or 14 pin header. ? 15 pin d connector available with 14 or 16 pin header. ? 25 pin d connector available with 24 pin header. ? 37 pin d connector available with 40 pin header. ? 50 pin d connector available with two 24 pin headers. ? consult factory for jumper lengths under 2.000 [50.80]. header specifications: ? header body is red ul 94-hb glass-filled nylon. consult factory for ul 94v-0 rated material. ? header pins are brass, 1/2 hard. ? header pin plating is 10 m [.25 m m] min. gold per mil-g-45204 over 50 m [1.27 m m] min. nickel per qq-n-290. d-subminiature connector specifications: ? insulator is ul 94v-0 flame-retardant thermoplastic. ? contacts are copper alloy. ? contact plating is 100 m [2.54 m m] min. gold over nickel. cable specifications: ? insulation is ul style 2697 polyvinyl chloride (pvc). ? laminate is clear pvc, self-extinguishing. ? conductors are 28 awg, 7/36 strand, tinned copper per astm b 33. ? current rating=1 amp @ 10c [50f] above ambient. ? voltage rating=300 volts. ? temperature rating=176f [80c]. ? capacitance=13.0 pf/ft. [42.7pf/meter] nominal @1 mhz. ? crosstalk: 10 sample, 5 ns rise time with 2 lines driven. near end=4.7%; far end=4.3% nominal. ? propagation delay=1.5 ns/ft. [4.9 ns/meter] nominal. ? insulation resistance=1010 ohms (10 ft. [3 meters] min.). mounting considerations: ?suggested pcb hole size=.033 .002 [.86 .05]. a ll dimensions : inches [ millimeters ] all tolerances .005 [.13] unless otherwise specified l .125 l .125 printouts of this document may be o ut of date and should be considered uncontrolled north america frenchtown, nj usa tel: (908) 996-6841 fax: (908) 996-3891 uk/ireland/gb tel: +44 870 240 0249 fax: +44 1653 600493 uking@arieselec.com europe/mainland/holland tel: +31 78 615 94 65 fax: +31 78 615 43 11 europe@arieselec.com http://www.arieselec.com ? info@arieselec.com 11016 rev.b
xxx-xxx-xxx no. of contacts (d-connector) length l in inches no. of termina- tion contacts termination style (a, b, c, d, e, or m, f for male or female d con- nector) m=male d connector f=female d connector dip and d subminiature jumpers (cont.) d subminia ture connect or det ail ordering informa tion d connecto r 9 d 8 dip 9 d 14 dip 15 d 14 dip 15 d 16 dip 25 d 24 dip 37 d 40 dip 50 d (2) 24 dip 1 1 1 1 1 1 1 1b 2 2 2 2 2 2 2 24b 3 3 3 3 3 3 3 2b 4 4 4 4 4 4 4 23b 5 dummy 5 5 5 5 5 3b 6 8 14 6 6 6 6 22b 7 7 13 7 7 7 7 4b 8 6 12 dummy 8 8 8 21b 9 5 11 14 16 9 9 5b 10 13 15 10 10 20b 11 dip 12 14 11 11 6b 12 6 11 13 12 12 19b 13 thru 10 12 dummy 13 7b 14 10 dummy 9 11 24 14 18b 15 8 10 23 15 8b 16 22 16 17b 17 dip 9 21 17 8b 18 dummy 20 18 4a 19 19 19 22a 20 18 40 3a 21 17 39 23a 22 16 38 2a 23 15 37 24a 24 14 36 1a 25 13 35 dummy 26 34 dummy 27 33 13b 28 32 12b 29 31 14b 30 30 11b 31 29 15b 32 28 10b 33 27 16b 34 26 21a 35 25 15a 36 24 20a 37 23 6a 38 19a 39 dip 7a 40 20,21,22 18a 41 dummy 8a 42 17a 43 9a 44 16a 45 10a 46 15a 47 11a 48 14a 49 12a 50 13a no. of pins dim. c dim. d dim. e dim. f 9 male .984 [24.99] 1.220 [30.99] .494 [12.55] .325 [8.26] 9 female .972 [24.69] 1.219 [30.96] .494 [12.55] .243 [6.17] 15 male 1.310 [33.27] 1.545 [39.24] .494 [12.55] .232 [5.89] 15 female 1.312 [33.33] 1.542 [39.17] .494 [12.55] .243 [6.17] 25 male 1.850 [46.99] 2.094 [53.19] .494 [12.55] .230 [5.84] 25 female 1.850 [46.99] 2.094 [53.19] .494 [12.55] .243 [6.17] 37 male 2.500 [63.50] 2.737 [69.52] .494 [12.55] .230 [5.84] 37 female 2.500 [63.50] 2.740 [69.60] .494 [12.55] .243 [6.17] 50 male 2.406 [61.11] 2.640 [67.06] .494 [12.55] .230 [5.84] 50 female 2.406 [61.11] 2.643 [67.13] .494 [12.55] .243 [6.17] see data sheet 11016 for other configurations and additional information. note: all dip header chamfers (pin 1 i.d.) shown with female d con- nector. for male d connector, pin 1 is in diagonally opposite corner. wiring list - d t o dip style c style d style e style m or f wire 1 wire 1 minimum length l= d to dip: 2.000 [50.80] d to d: 3.000 [76.20] l .125 l .125 l .125 l .125 north america frenchtown, nj usa tel: (908) 996-6841 fax: (908) 996-3891 uk/ireland/gb tel: +44 870 240 0249 fax: +44 1653 600493 uking@arieselec.com europe/mainland/holland tel: +31 78 615 94 65 fax: +31 78 615 43 11 europe@arieselec.com http://www.arieselec.com ? info@arieselec.com 11017 rev.b typical wiring sequence for termination style d and e, male d connector shown contact side. 9, 15, 25, & 37 contact d connector 50 contact d connector printouts of this document may be out of date and should be considered uncontrolled
|
